Hamilton Beach HBB908 User Manual download pdf (Page 7)

Caring for the Blender

Cleaning Instructions

General Cleaning

Do not allow food residue to dry on any part of

the blender. Wash and rinse container, cutter unit

assembly, and base after each use, or whenever

it will not be used again within 1 hour, as follows:

1. Remove the container from the base, and then

remove the cover. Add cleaning solution to the

container. Use a washing solution of hot water

(less than 115°F/46°C) and a nonsudsing

detergent. Use the recommended amount of

detergent.

2. Scrub and flush out the container interior,

cover, and filler cap to remove food residue.

Empty container.

3. Fill container

⁄4 full with fresh washing solution

and place it on the base.

4. Replace the cover on the container and run

the blender on HIGH (2) speed for 2 minutes.

5. Repeat Step 3 using clean rinse water

(95°F/35°C).

6. Wipe down the container, filler cap, and cover

with a soft cloth or sponge, dampened with

fresh washing solution.

7. Wipe the exterior of the base with a damp

cloth or sponge. The base contains electrical

components; do not immerse. Do not use a

high-pressure washer or use a dishwasher to

clean the base.

Sanitizing

1. Wash container as instructed in “General

cleaning.”

2. Fill container with sanitizing solution (See

“Recommended Sanitizing Solution” below)

and place on base.

3. Replace cover and filler cap and run on LOW (1)

speed for 2 minutes. Empty container.

4. Wipe the container exterior with a soft cloth or

sponge dampened with sanitizing solution.

5. Immerse the cover and filler cap in sanitizing

solution for 2 minutes.

6. Remove any remaining moisture from cutter

assembly by placing empty container on base

and running on HIGH (2) speed for 2 seconds.

7. When ready to use, rinse with clean water.

NOTE: Do not rinse container, cover, or filler cap

after sanitizing.

Recommended Sanitizing Solution:

The sanitizing solution should consist of 1

tablespoon of household bleach per 1 gallon of

clean, cool water (60°F/16°C) mixed according

to the instructions on the bleach container. When

using a sanitizing solution other than that

recommended, the sanitizing solution concentration

should be tested using commercially available test

strips and should indicate a concentration between

100 and 200 parts per million of bleach to water.

wWARNING

Electrical Shock Hazard

Plug into a grounded outlet.

Do not remove ground.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result

in death, fire, or electrical shock.

wWARNING

Cut Hazard

Always place cover on container when

blending.

Do not put hands, spoons, or other utensils

in container when blending.

Failure to follow these instructions can result

in broken bones, cuts, or other injuries.

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments

Hamilton Beach HBB908 User Manual Page 7

Comments to this Manuals

Related products and manuals for Blenders Hamilton Beach HBB908